Arduino - Remote control (RF-TX)

[Makso]

To bi trebalo biti ovako:

Code:

int LED = 12;
int taster1 = 8;
int taster2 = 9;
unsigned char taster1test = 0;
unsigned char taster2test = 0;
boolean flag1 = false;

void setup() {
 pinMode(LED, OUTPUT);
 pinMode(taster1, INPUT);
 pinMode(taster2, INPUT);
 Serial.begin(9600);

 // initialize Timer1
 noInterrupts(); // disable all interrupts
 TCCR1A = 0;
 TCCR1B = 0;
 
 TCNT1 = 62535;//49536;//62437;//34286; // preload timer 65536-16MHz/256/2Hz
 TCCR1B |= (0 << CS10 ) | (0 << CS11) | (1 << CS12); //256
 TIMSK1 |= (1 << TOIE1); // enable timer overflow interrupt
 interrupts(); // enable all interrupts
}

 ISR(TIMER1_OVF_vect) // interrupt service routine that wraps a user defined function supplied by attachInterrupt
   {
      TCNT1 = 62535; // preload timer
      if(digitalRead(8) == HIGH){
       taster1test++;
        if(taster1test > 3){
         flag1 = true;
         digitalWrite(LED, HIGH);
        }
      }
      else{
       taster1test = 0;
      }
   }

void loop() {
 while(1){
   if(flag1){
     flag1 = false;
     Serial.println(1111);
   }
 }
}

samo nešto sam promašio, jer mi odmah zakuca u while petlju i svijetli mi ledica što sam ja dodao da znam kad je taster aktivan ali ne šalje podatke (ne svijetli mi TX lampica)?