Arduino - tutorijali, pitanja, primjeri i projekti

[me[R]a]

U prepiski je napravljeno nekoliko sintaksnih gresaka sa viticastim zagradama...
Probaj sad ovaj kod dole pa javi....

Taster moras nekad kratko a nekad duze da drzis da bi promenio Start/Pause to bi se sa softverskim debounce resilo...

Code:

int keyStart = 13;             //deklarises i inicijalizujes globalnu promenljivu za taster boolean toggleKey = false;      //promenljiva za status tastera dali ako je stisnut menja vrednost START/PAUSA int num = 0;                   //tvoja promenljiva za broj samo sto je sad inicijalizujemo int aPin = 2;  //         A int bPin = 3;  //      ________ int cPin = 4;  //     |        | int dPin = 5;  //   F |        |  B int ePin = 6;  //     |    G   | int fPin = 7;  //     |________| int gPin = 8;  //     |        | int GND1 = 9;  //     |        | int GND2 = 10; //   E |        |   C int GND3 = 11; //     |________| int GND4 = 12; //                      //         D int dig1 = 0; int dig2 = 0; int dig3 = 0; int dig4 = 0; int DTime = 4; int tmp = 0; void setup() { pinMode(keyStart, INPUT); // ovo stavis u void setup() pinMode(aPin, OUTPUT); pinMode(bPin, OUTPUT); pinMode(cPin, OUTPUT); pinMode(dPin, OUTPUT); pinMode(ePin, OUTPUT);   pinMode(fPin, OUTPUT); pinMode(gPin, OUTPUT); pinMode(GND1, OUTPUT); pinMode(GND2, OUTPUT); pinMode(GND3, OUTPUT); pinMode(GND4, OUTPUT); Serial.begin(9600); } void loop() {  digitalWrite( GND1, LOW);  digitalWrite( GND2, LOW);  digitalWrite( GND3, LOW);  digitalWrite( GND4, LOW);  int taster = digitalRead(keyStart);  if(taster == 1 ) // Svaki put kad se pritisne taster menja se status START ili  PAUSA    {       toggleKey = !toggleKey;     //Serial.println(toggleKey);  }  //   ************************************** ova nije bila ovde     //{  ************************************** ova je bila viska        if(toggleKey) //u zavisnosti ako je true(START) onda broj se uvecava i prikazuje novi        {           if(++num > 9999)                   //ako je false(PAUSE) onda se broj ne uvecava i prikazuje se stalno zadnji           {              num = 0;           }           //Serial.println(num);     //broj tj pauzirano je brojanje...        }       //}   ************************************ ova je bila viska     dig1 = num / 1000;     tmp = num - (dig1 * 1000);     dig2 = tmp / 100;     tmp = tmp - (dig2 * 100);     dig3 = tmp / 10;     dig4 = tmp - (dig3 *10);      //}      ************************************ ova je bila viska    digitalWrite( GND4, HIGH);    //digit 4  pickNumber(dig4);  delay(DTime);  digitalWrite( GND4, LOW);  clearLEDs();  digitalWrite( GND3, HIGH);    //digit 3  pickNumber(dig3);  delay(DTime);  digitalWrite( GND3, LOW);  clearLEDs();  digitalWrite( GND2, HIGH);   //digit 2  pickNumber(dig2);  delay(DTime);  digitalWrite( GND2, LOW);  clearLEDs();  digitalWrite( GND1, HIGH);   //digit 1  pickNumber(dig1);  delay(DTime);  digitalWrite( GND1, LOW);  clearLEDs(); } void pickNumber(int x){ switch(x){   case 0: zero(); break;   case 1: one(); break;   case 2: two(); break;   case 3: three(); break;   case 4: four(); break;   case 5: five(); break;   case 6: six(); break;   case 7: seven(); break;   case 8: eight(); break;   case 9: nine(); break;   default: break; } } void clearLEDs() {   digitalWrite(  2, LOW); // A digitalWrite(  3, LOW); // B digitalWrite(  4, LOW); // C digitalWrite(  5, LOW); // D digitalWrite(  6, LOW); // E digitalWrite(  7, LOW); // F digitalWrite(  8, LOW); // G } void one() { digitalWrite( aPin, LOW); digitalWrite( bPin, HIGH); digitalWrite( cPin, HIGH); digitalWrite( dPin, LOW); digitalWrite( ePin, LOW); digitalWrite( fPin, LOW); digitalWrite( gPin, LOW); } void two() { digitalWrite( aPin, HIGH); digitalWrite( bPin, HIGH); digitalWrite( cPin, LOW); digitalWrite( dPin, HIGH); digitalWrite( ePin, HIGH); digitalWrite( fPin, LOW); digitalWrite( gPin, HIGH); } void three() { digitalWrite( aPin, HIGH); digitalWrite( bPin, HIGH); digitalWrite( cPin, HIGH); digitalWrite( dPin, HIGH); digitalWrite( ePin, LOW); digitalWrite( fPin, LOW); digitalWrite( gPin, HIGH); } void four() { digitalWrite( aPin, LOW); digitalWrite( bPin, HIGH); digitalWrite( cPin, HIGH); digitalWrite( dPin, LOW); digitalWrite( ePin, LOW); digitalWrite( fPin, HIGH); digitalWrite( gPin, HIGH); } void five() { digitalWrite( aPin, HIGH); digitalWrite( bPin, LOW); digitalWrite( cPin, HIGH); digitalWrite( dPin, HIGH); digitalWrite( ePin, LOW); digitalWrite( fPin, HIGH); digitalWrite( gPin, HIGH); } void six() { digitalWrite( aPin, HIGH); digitalWrite( bPin, LOW); digitalWrite( cPin, HIGH); digitalWrite( dPin, HIGH); digitalWrite( ePin, HIGH); digitalWrite( fPin, HIGH); digitalWrite( gPin, HIGH); } void seven() { digitalWrite( aPin, HIGH); digitalWrite( bPin, HIGH); digitalWrite( cPin, HIGH); digitalWrite( dPin, LOW); digitalWrite( ePin, LOW); digitalWrite( fPin, LOW); digitalWrite( gPin, LOW); } void eight() { digitalWrite( aPin, HIGH); digitalWrite( bPin, HIGH); digitalWrite( cPin, HIGH); digitalWrite( dPin, HIGH); digitalWrite( ePin, HIGH); digitalWrite( fPin, HIGH); digitalWrite( gPin, HIGH); } void nine() { digitalWrite( aPin, HIGH); digitalWrite( bPin, HIGH); digitalWrite( cPin, HIGH); digitalWrite( dPin, HIGH); digitalWrite( ePin, LOW); digitalWrite( fPin, HIGH); digitalWrite( gPin, HIGH); } void zero() { digitalWrite( aPin, HIGH); digitalWrite( bPin, HIGH); digitalWrite( cPin, HIGH); digitalWrite( dPin, HIGH); digitalWrite( ePin, HIGH); digitalWrite( fPin, HIGH); digitalWrite( gPin, LOW); }