Arduino - tutorijali, pitanja, primjeri i projekti

[MILANNN]

Sve probao i nece.Na serial monitoru menja vrednosti kad se okrece potenciometar.

int taster1 = 2;
int taster2 = 3;

int ledpin1 = 7;
int ledpin2 = 8;

const int analog1 = A1;
const int analog2 = A2;
int ana1 = 0;
int ana2 = 0;


void setup() {

Serial.begin(115200);
pinMode(taster1,INPUT);
pinMode(taster2,INPUT);

pinMode(ledpin1,OUTPUT);
pinMode(ledpin2,OUTPUT);

pinMode(analog1, INPUT);
pinMode(analog2,INPUT);

digitalWrite(ledpin1,LOW);
digitalWrite(ledpin2,LOW);
}

void loop() {

if(digitalRead(taster1) == LOW)
{
ana1 = analogRead(analog1);
if(ana1 > 500)
digitalWrite(ledpin1,HIGH);
Serial.print ("radi");
Serial.println(ana1);
}

else
{
digitalWrite(ledpin1,LOW);
Serial.print ("**");
Serial.println(ana1);
}


if(digitalRead(taster2) == LOW)
{
ana2 = analogRead(analog2);
if(ana2 > 500)
analogWrite(ledpin2,HIGH);
Serial.print ("radi");
Serial.println(ana2);
}

else
{
digitalWrite(ledpin2,LOW);
Serial.print ("##");
Serial.println(ana2);
}
}