+- DIY Electronic projects (https://forum.yu3ma.net)
+-- Forum: Merenja i merni uređaji - Measurements and Equipment (https://forum.yu3ma.net/forumdisplay.php?fid=8)
+--- Forum: Merenja i merni uređaji - Measurements and Equipment (https://forum.yu3ma.net/forumdisplay.php?fid=32)
+--- Thread: Merlin Gerin Power Logic PM9 (/showthread.php?tid=2077)
Merlin Gerin Power Logic PM9 - gorso69 - 01-05-2019
Dobio sam ovog mališu Merlin Gerin Power logic PM9 (15199BA).Za njega mi trebaju SMT 25/5A ili 30/5A 3komada ali je problem što bih ja to da stavim u stansku tablu a tamo nema mesta za standardne zbog gabarita.Mogu li se napraviti I koje jezgro treba za to?Evo nekih podataka o ulazima.
input:
50 to 450 V AC range (direct)
y 1000 V AC (with external VTs)
acceptable overload: 515 V
Current measurement input:
CT: 5 to 10000 A / 5A
range: 10 mA to 6 A
acceptable overload: 6 A permanent, 20 A / 10 s, 50 A / 1 s.
consumption: 0.55 VA
Measurement frequency: 45…65 Hz
Max. consumption: < 5 VA
Power supply: 220...240V~ (±10 %)
Measurement accuracy: class 1
current and voltage: 0.5 % of value read
power: 1 % of value read from 0.8 C to 0.5 L
frequency: 0.2 Hz
power factor: 2 % from 0.8 C to 0.5 L
active energy: cl. 1 IEC 62053-21
reactive energy: cl. 2 IEC 62053-23
Degree of protection: IP52 on front face
Connection by tunnel terminals: 4 mm²
Weight: 300 g
Operating temperature: -5 °C to +55 °C (K55)
Cat. III insulation, degree of pollution 2
Safety: IEC 61010-1
Product standard: IEC 61557-12 (PMD/SD, PMD/SS)
Pozdrav