SDR via VGA (osmo-fl2k) - Printable Version +- DIY Electronic projects (https://forum.yu3ma.net) +-- Forum: RF - Radio tehnika (https://forum.yu3ma.net/forumdisplay.php?fid=47) +--- Forum: SDR – Software Defined Radio (https://forum.yu3ma.net/forumdisplay.php?fid=48) +--- Thread: SDR via VGA (osmo-fl2k) (/showthread.php?tid=1880) |
SDR via VGA (osmo-fl2k) - 1van - 04-23-2018 Quote:The idea of using VGA adapters as a transmitter has a long history. In 2001 Erik Thiele released Tempest for Eliza, which transmits a signal that can be received with an AM radio. In 2005 Fabrice Bellard used an ATI Radeon 9200SE to transmit DVB-T, PAL and NTSC video signals. Later in 2009, Bartek Kania published VGASIG, which allows to transmit wideband FM radio in realtime using SDL and a regular graphics card. In 2013, siro at das Labor used all three DAC outputs of a VGA card and attached an I/Q modulator to transmit arbitrary signals. https://osmocom.org/projects/osmo-fl2k/wiki/Wiki RE: SDR via VGA (osmo-fl2k) - mikikg - 04-23-2018 Aha, opet Steve Markgraf, to lici na njega : ) RE: SDR via VGA (osmo-fl2k) - mikikg - 04-23-2018 Steve je sjajan lik, trenutno radi u TI, on je prvi provalio foru sa GSM i oscilatorima, i Si5351 sam od njega prvi put video! Vidi sta radi, igra se ... Treba medalju da mu dodelimo, makar neku forumsku : ) |